AboutTraffic, Parking & AccessIndustrial Data Acquisition ProductsDistributorsMedia CentreDownload CentreContact Us

PM8AI/V - 8 Voltage Input Module


The PM8AI/V is a 8 channel voltage input module. The inputs are isolated from the logic and share a common negative terminal.

The standard setting for the PM8AI/V module is 0 – 10V. An input voltage of 0 - 10Volts represents an output of 0 - 4095 and 2 volts would give a reading of 819 ± 1LSB.  To obtain an output value of 0 to 4095 for an input signal of 2 to 10V  the offset switch is switched on. An input range of 0(1) to 5Vdc is available by removing the jumper link located on the analogue board inside the enclosure.
 

PM8AI/V – 8 VOLTAGE INPUTS
Analog Inputs 8
Type Single-Ended
Voltage 0-10Vdc / 0-5Vdc
Offset (switch selectable) 2Vdc (0-10) / 1Vdc (0-5)
Resolution 12 bit (0-4095)
Sample rate 12.5 samples/sec
Input Impedance 20KOhms
Drift 50 ppm/deg.C typ.
Accuracy 0.2 % of span
Isolation (Field & Logic) 1500VAC RMS
Power supply (Field) +12Vdc to 24Vdc













 











Download PROMUX Manual  

  
PM8AI/V - 8 Voltage Input Module
 
© PROCON 2009. All Rights Reserved.