AboutTraffic, Parking & AccessIndustrial Data Acquisition ProductsDistributorsMedia CentreDownload CentreContact Us
PROBUS – I/O Modules

PB6RO – 6 Relay Output Module


The PB6RO module has 6 normally open/ normally closed relay outputs. These modules may be used when a higher drive capability is required, or when isolation between outputs are required.

The outputs are written to by the Modbus master device such as a PC or PLC. Each output can be individually switched on or off, or all outputs can be set up at the same time by writing a single number to the output register which represents the status of all outputs.

An output watchdog timer can be configured to switch off all the outputs if there has been no communications with the module for up to 255 seconds. A value of 0 seconds will disable this timer and the outputs will remain in the last programmed state.
 

PB6RO – 6 RELAY OUTPUTS
Digital Outputs 6
Type Relay - 1 x Form C
Max Load Current 1A @ 220VAC / 1A @ 28VDC
Isolation (Field & Logic) 4000VAC RMS
Watch dog output timer Disable or 1-255 sec  adjustable
Status Indication LED for each channel
Power supply (Logic) +24Vdc

 











  
PB6RO – 6 Relay Output Module
 
© PROCON 2009. All Rights Reserved.